UHP-200

UHP-200 is a universal VSAT router with Software-Defined Architecture pioneered by UHP Networks. The device packs industry-highest processing capability into a very compact size with power consumption under 12W. It can process up to 450 Mbps of aggregate traffic. UHP-200 comprises two DVB demodulators, four TDMA burst demodulators, a universal TDMA/SCPC modulator and a powerful IP router capable of processing over 190 000 IP packets per second (PPS). The high processing capability allows implementation of uniquely efficient protocols for network access, resource allocation and data encapsulation as well as support for advanced modulation and coding.
 

Categories: ,

Description

UHP-200 is a truly universal router which can operate as a star or mesh TDM/TDMA remote or as a Tx/Rx SCPC IP modem, or as a node in a Hubless TDMA (full mesh) network, or as a building block (universal controller) in a large TDM/TDMA Hub.

This unique device can even implement multiple access protocols and sophisticated QoS, so that it can work as a fully-fledged TDM/TDMA Hub with one Outbound TDM and up to 4 Inbound TDMA carriers. UHP-200 can switch on-the-fly between the modes, using any of the 8 configuration profiles stored in the device.

Multiple demodulators allow simultaneous reception of two DVB (TDM or SCPC) carriers and a group of up to 4 mesh TDMA carriers from two distinct satellite beams or from two antennas. This makes UHP-200 an optimum choice for TDMA Mesh networks and also for hierarchical networks with multiple DVB carriers.

Small size, low power consumption and low count of active electronic components ensure highest reliability with over 200 000 hours MTBF.

UHP Dual Gateway provides optimum solution for hierarchical networks and makes it possible to design such networks with single-hop connectivity using low-cost VSAT terminals and affordable Regional Gateways. The Central Gateway has a UHP TDM/TDMA Hub with at least one DVB carrier (TDM) and several TDMA return carriers. The Regional Gateway also transmits a DVB carrier and is capable of receiving one or more TDMA carriers.

UHP Beam Switching feature uses OpenAMIP protocol to communicate with a mobile antenna controller to retrieve an actual geographic location and command antenna pointing, activate transmission, etc. UHP router selects the most appropriate satellite beam according to its current geographic position and pre-defined coverage maps, dynamically adjusts frequencies, levels and changes the mode of operation to ensure compatibility with new network.

Highlights

  • World’s fastest VSAT router with aggregate throughput up to 450 Mbps and powerful UHP-RTOS
  • Two independent DVB demodulators with software-switchable IF inputs and rate up to 500 Msps
  • Efficient DVB-S2/S2X ACM modulations with 5% or 20% roll-off and support for HTS
  • One MF-TDMA demodulator with innovative protocol and proven efficiency of 96% vs. SCPC
  • Adaptive coding and modulation (ACM) in forward/return channels, including SCPC/TDMA modes
  • Various modes of operation and topologies: SCPC, TDM/ TDMA Star&Mesh, Hubless TDMA
  • HTS-ready VSAT with support of multiple beams, bands, satellites reception with traffic balancing
  • Superior IP router productivity up to 190 000 PPS and rich set of supported protocols, QoS
  • Layer 3 routing architecture and Layer 2 bridging mode with IPv6 transport
  • Two Gigabyte Ethernet user ports with built-in switch simplifies scalability and connection of CPE
  • Ultra-low latency VSAT system with round-trip delay about 570 ms for TDMA mode of operation
  • Industry’s most compact full-scale Hub with multiple MF- TDMA channels and up to 2 000 terminals
  • 1:1 automatic redundancy without external controllers or M:N Smart Redundancy

Resources

UHP-200 Spec Sheet

Reviews

There are no reviews yet.

Be the first to review “UHP-200”

Your email address will not be published. Required fields are marked *

Related products