Newtec MDM6000 Satellite Modem

The MDM6000 modem is typically installed at both ends of a point-to-point satellite link or at the remote sites of a star network. The unit can work as a modulator, demodulator or modem depending on the network configuration and integrates seamlessly with terrestrial IP networks and equipment. The modem is in full compliance with the DVB-S2 and DVB-S2X standards to achieve barrier-breaking efficiency at maximum service availability.

 

Categories: ,

Description

The MDM6000 modem is typically installed at both ends of a point-to-point satellite link or at the remote sites of a star network. The unit can work as a modulator, demodulator or modem depending on the network configuration and integrates seamlessly with terrestrial IP networks and equipment. The modem is in full compliance with the DVB-S2 and DVB-S2X standards to achieve barrier-breaking efficiency at maximum service availability.

When ultra-high speeds are required…

In applications demanding higher speeds and packets-per-seconds processing than those offered by the stand-alone MDM6000, the MDM6000 High Speed solution can be used. It adds an external packet processor that handles shaping, bandwidth management and encapsulation to achieve up to 850 Mbps and 800 kpps duplex.

Efficiency at the core

The Newtec MDM6000 Satellite Modem combines a number of innovative elements to improve current market available efficiencies, thereby lowering the overall Total Cost of Ownership.

Key Features

 

  • Very granular rate licensing scheme with rates from 1 Mbps up to 425 Mbps bidirectional
  • Suitable for low, medium and high speed applications, for cellular backhaul, trunking and fiber restoration, baudrates upto 133 MBaud to handle all common transponder sizes
  • Clean Channel Technology for additional bandwidth efficiency gains
  • DVB-S2, DVB-S2X (up to 256APSK) and Newtec S2 Extensions backward compatibility
  • Built-in Bandwidth Cancellation (up to 72 Mbaud) with fractional licensing for redundant modem
  • Optional Equalink®
  • All modcods and baudrates default enabled licensing on a per Mbps encapsulated rate.
  • Default IF and L-band on Tx and Rx for ease of operation
  • Automatic Uplink Power Control for combating uplink fading
  • Optional FlexACM for adaptive environments
  • Standard GSE encapsulation for minimal overhead with support for ULE, MPE, XPE for legacy networks
  • Adaptive traffic shaping and bandwidth management
  • Advanced Quality of Service (QoS)
  • Easy integration with terrestrial IP data networks
  • Easy operation through secure frontpanel, SNMP, HTTP and CLI interfaces

Resources

Newtec MDM6000 IP Satellite Modem R3.3

Reviews

There are no reviews yet.

Be the first to review “Newtec MDM6000 Satellite Modem”

Your email address will not be published. Required fields are marked *