Products

Newtec MDM6000 High Speed Satellite Modem

The Newtec MDM6000 High Speed Satellite Modem is the next generation modem optimized for point-to-point very high speed applications over satellite.

Description

Newtec MDM6000 High Speed Satellite Modem

The Newtec MDM6000 High Speed Satellite Modem is the next generation modem optimized for point-to-point very high speed applications over satellite. In combination with the NOP1760 Bandwidth Manager the modem achieves barrier-breaking speeds at the highest bandwidth efficiency and maximum service availability. The MDM6000 very high speed solution is in full compliance with the DVB-S2 standards and the upcoming S2 Extensions.

Input Interfaces
Auto switching 10/100/1000 Base-T Ethernet interfaces
Maximum rates 380 Mbit/s bidirectional (imix traffic mix, 140kpps each direction)
Layer 2 bridge function ethernet over satellite (IPv6/VLAN/MPLS compatible)
Layer 3 static router function IPv4 packets over satellite
Up to 100 IP routes
Advanced QoS features Adaptive Traffic Shaping according to PIR/CIR Flexible traffic classification on VLAN/MPLS/ IPv4/IPv6
DVB-GSE Encapsulation/Decapsulation of IP/ Ethernet frames in DVB-S2 & S2 Extensions
Data filtering (downlink) Up to 64 receive filters
Modulation and Demodulation
S2 Extensions (optional)
Outer/Inner FEC: BCH/ LDPC
MODCODs
QPSK 45/180, 60/180, 72/180, 80/180, 90/180, 100/180, 108/180, 114/180, 120/180, 126/180, 135/180, 144/180, 150/180, 160/180, 162/180
8PSK 80/180, 90/180, 100/180, 108/180, 114/180, 120/180, 126/180, 135/180, 144/180, 150/180
16APSK 80/180, 90/180, 100/180, 108/180, 114/180, 120/180, 126/180, 135/180, 144/180, 150/180, 160/180, 162/180
32APSK 100/180, 108/180, 114/180, 120/180, 126/180, 135/180, 144/180, 150/180, 160/180, 162/180
64APSK 90/180, 100/180, 108/180, 114/180, 120/180, 126/180, 135/180, 144/180, 150/180, 160/180, 162/180
Linear MODCODs
8PSK-L 80/180, 90/180, 100/180, 108/180, 114/180, 120/180
16APSK-L 80/180, 190/180, 100/180, 108/180, 114/180, 120/180, 126/180, 135/180, 144/180, 150/180, 160/180, 162/180
64APSK-L 90/180, 100/180, 108/180, 114/180, 120/180, 126/180, 135/180, 144/180, 150/180, 160/180, 162/180
FlexACM® controller (optional)
FlexACM® client embedded in MDM6000 modem (optional)
Automatic Uplink Power Control
Baud Rate Range
Modulator 0,050 – 72MBaud
Class 1 Demodulator 1 – 60Mbaud (depending on MODCOD)
Class 2 Demodulator 1 – 72Mbaud
FRAME LENGTH
DVB-S2 Short Frames 16200 bits
DVB-S2 Normal Frames 64800 bits
S2 Extensions Normal Frames 64800 bits
CLEAN CHANNEL TECHNOLOGY
Roll-off 5% -10% -15% -20% – 25% – 35%
Optimum carrier spacing
Advanced filter technology
CARRIER INTERFERENCE REDUCTION
DVB RF Carrier ID (DVB-CID)
Spread Spectrum Modulator (BPSK)
Supports User Data
Compliant to DVB Standard
Modulation Interfaces
L-BAND
Connector N(F), 50 ohms (optional SMA adapter)
Frequency 950 – 2150 MHz (10 Hz steps)
Level -35/+7 dBm (+/- 2dB)
Return loss > 14 dB
Switchable 10MHz Reference
Spurious performance
Better than – 65 dBc/4kHz @ +5 dBm output level and > 256kBaud
Non-signal related: < – 80 dBc @ +5 dBm output
IF-BAND (CONFIGURATION OPTION)
Connector BNC (F) – 75 ohms (intermateable with 50 ohms)
Frequency 50 – 180 MHz (10 Hz steps)
Level -35/+10 dBm (± 2 dB)
Return loss 50 ohms : > 14 dB
75 ohms : > 20 dB
Spurious performance
Better than – 65 dBc/4kHz @ +5 dBm output level and > 256kBaud
Non-signal related:< – 80 dBc @ +5 dBm output
L-BAND MONITORING
Connector SMA (F), 50 ohms
Frequency Same as L-Band output frequency or 1050 MHz in case of IF output option only
Level -45 dBm
Return loss > 10 dB
10 MHZ REFERENCE OUTPUT (OPTIONAL)
Connector BNC (F), 50 ohms
Output level +3 dBm (+/- 2dB)
BUC POWER (OPTIONAL)
Max. current 3.8A
Voltage 24V, 48V (Software controlled)
Demodulation Interfaces
DUAL L-BAND INPUT (DEFAULT)
Connector 2 x F-type (F), 75 Ohms
Return loss > 7 dB (75 Ohm – F(F))
Level -65/-25dBm
Frequency 950 – 2150 MHz
Adjacent signal < (Co+7) dBm/Hz with Co = signal level density
IF-BAND INPUT (OPTIONAL, REPLACES ONE L-BAND INPUT)
Connector BNC (F) – 75 ohms
Return loss > 15 dB
Level 55 to -15 dBm
Frequency 50 – 180 MHz
Adjacent signal < (Co+7) dBm/Hz with Co = signal level density
LNB POWER AND CONTROL
max. current 350 mA (on selected IFL input)
voltage
11,5 -14 V (Vertical polarization)
16 -19 V (Horizontal polarization) & additional
22 kHz +/- 4KHz (band selection according
to universal LNB for Astra satellites & DiSEqC command transmission)
Internal 10 MHz Reference Frequency
STANDARD STABILITY
Stability +/- 2000 ppb over 0 to 70° C
Ageing +/- 500 ppb/10year
MONITOR AND CONTROL INTERFACES
M&C connectivity via separate Ethernet links
Web server GUI (HTTP) via web browser
Diagnostics report, alarm log (HTTP)
SNMP v2c
ALARM INTERFACE
Electrical dual contact closure alarm contacts
Connector 9-pin sub-D (F)
Logical interface and general device alarm
Physical
Height 2RU, width 19”, depth 55 cm, 12 kg
Power supply 90-130 & 180-260 Vac, 105 VA, 47-63 Hz
Temperature
Operational
Storage
0°C to +50°C / +32°F to +122°F
-40° to +70°C / -40°F to +158°F
Humidity 5% to 85% non-condensing
CE label and UL

Related Products